Cablofil® Tray Splicing Parts

Cablofil® offers a number of splices for wire cable trays to fill any installation demand. All of these splicing devices were designed with one goal - to make installation EAZY. Some of Cablofil®'s splices require NO TOOLS for installation. Yet each option offers a durable strong splice that has been tested and proven in installations around the world.

CE25
Washer clamp used with nut/bolt assembly (EZBN1-4). Package of 50.
Features:

• Splices any two sections of EZ tray
• Use correct number of Nut/Bolt/Clamp sets for each tray width:

• 2"-6" Tray - Use 2 Sets
• 8"-12" Tray - Use 3 Sets
• 16"-24" Tray - Use 4 Sets
• Use for bolting turns, bends, and tees

CE30
Washer clamp used with nut/bolt assembly (EZBN1-4). Package of 50.
Features:

• Splices any two sections of EZ tray
• Use correct number of Nut/Bolt/Clamp sets for each tray width:
• 2"-6" Tray - Use 2 Sets
• 8"-12" Tray - Use 3 Sets
• 16"-24" Tray - Use 4 Sets
• Use for bolting turns, bends, and tees

EZBN1-4
Nuts and bolts used with washers (CE25, CE30 & CE40) to clamp trays together and in place. Package of 50.
Features:

• Splices any two sections of EZ tray
• Use correct number of Nut/Bolt/Clamp sets for each tray width:
• 2"-6" Tray - Use 2 Sets
• 8"-12" Tray - Use 3 Sets
• 16"-24" Tray - Use 4 Sets
• Use for bolting turns, bends, and tees

SWKB - SWK B 2-Pc. Splice Washer Kit.
Features:

• Splices any two sections of EZ tray
• Use correct number of Nut/Bolt/Clamp sets for each tray width:
• 2"-6" Tray - Use 2 Sets
• 8"-12" Tray - Use 3 Sets
• 16"-24" Tray - Use 4 Sets
• Use for bolting turns, bends, and tees

• Use for splicing EZ tray on bends and adjustable turns
• 2 CE 40's are required for every connection

• Splices are quick and easy with the Preclick Splice system
• Only 2 splices per joint are required for 8" tray widths or less
• Allows for additional bolt connections at a later date
• Square hole allows for grounding screws and/or bolted connections

• Only 2 splices are needed to join 2 pieces of EZ Tray on tray widths up to 18" (uses two splices on the sides and one or two on the bottom for 24" tray)
• Special assembly tool is included in every bag of slices
• Saves up to 1/2 the installation time
• Corrosion resistant electro zinc plated

• Splices are specially designed to join two sections of CF 30 EZ Tray
• Other parts needed - EZ BN 1-4, CE 25, and CE 30 (sold separately)
• Electro zinc plated.
• Ideal for CF 30 cable trays

• Splices any two sections of EZ Tray
• Other parts needed - EZ BN 1-4, CE 25, CE 30
• Electro zinc plated
• Can be cut to fit with a bolt cutter
• Can be bent to fit with a bolt cutter

ED1100 - Universal Splice Bar
Features:

• Splices any two sections of EZ Tray
• Other parts needed - EZ BN 1-4, CE 25, CE 30
• Electro zinc plated
• Can be cut to fit with a bolt cutter
• Can be bent to fit with a bolt cutter

• 1 Kit contains hardware for 1 90° tee or 2 90° bends
• Slotted Design fits any size tray and eliminates precise tray alignment
• 90° brace is constructed of heavy gauge pre galvanized metal
• Each EZ T90 kit includes:
• (2) 90° braces
• (8) EZ BN 1-4
• (8) CE 25
• (4) CE 40

NOTE: Viewing PDF documents requires the free Adobe^® Reader^® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.