Cablofil® Wiring Tray Support Systems

From ceiling hung wiring tray installations in a communications closet to a trapeze hung wiring tray installation in a factory, Cablofil® has the right hanging accessory for you. Each hanging accessory is specifically designed to work with Cablofil®'s wire hanging tray and can utilize Cablofil®'s patented FAS system for fast tray attachment without need for additional hardware.

AS Trapeze Hanging Clip

Features:

• For trapeze hung installations
• Use 1/4" or 3/8" threaded rod (2 hex nuts needed)
• Poly grommet retains in slot - unsnaps for side loading cables
• Corrosion resistant pre-galvanized finish
• Tray can be detached on one side only to add cables
• Threaded rods, nuts, and washers sold separately

Features:

• Only one threaded rod is needed to suspend tray
• Stabilization tube accepts up to 1/2" threaded rod
• Patented FAS style attachment holds cable tray secure without nuts and bolts
• Corrosion resistant galvanized finish
• Threaded rods, nuts, and washers sold separately

Click here for FAS Center Rod Hangers specifications PDF

• For center hung mounting of 4" and 6" EZ Tray (use with 1/4" threaded rod)
• Snap in attachment requires no bolts, nuts, or tools to attach EZ Tray
• Corrosion resistant electro zinc galvanized finish
• Threaded rods, nut and washers sold separately

• Saves installation time - patented FAS style attachment holds cable tray secure without nuts and bolts
• Corrosion resistant pre-galvanized finish
• For trapeze hung installations - order one size larger than tray (example: for CF54-300 tray (12") use FASP400)
• Use with 1/4" rod only
• Threaded rods (THRD), nut (EZHN/EZCN) and washers (EZFW) sold separately

Click here for FAS Profile specifications PDF

• For trapeze mounting tray widths up to 24" to ceilings
• For widths up to 8", use 1 fastener set (EZBN1-4 and CE 25). For 12", 16" and 18" widths use 2 fasteners (EZBN1-4 and CE 25)
• Corrosion resistant pre-galvanized finish
• Can be cut to size on site
• Square holes accept up to 3/8" rods, slots accept up to 1/4" rods
• Can be used in conjunction with CS brackets for multi level EZ Tray installation from ceilings
• Threaded rods, nuts, and washers sold separately

Features:

• Saves installation time - patented FAS style attachment holds cable tray secure without nuts and bolts
• Corrosion resistant pre-galvanized finish
• Can be stacked for multiple levels of cable tray support

Features:

• For cable tray installations under ceiling or overhangs
• Use with tray widths up to 12"
• To secure tray to support: Use 1 fastener set (EZBN1-4 and CE 25) for tray widths up to 8". Use 2 fasteners for 12" wide tray
• Corrosion resistant pre-galvanized finish
• Can be stacked for multilevel EZ Tray installations
• Nuts, bolts and washers sold separately

Lugs, Nuts, Washers, and Rods
Description	Grounding Lug	1/4" Coupling Nut	1/4" Hex Nut	1/4" Flat washer	1/4" and 3/8" Threaded Rod
Model #	GTA2-2	EZCN1-4B - 1/4 inch Coupling Nut	EZHN1-4B - 1/4 inch Hex Nut	EZFW1-4B - 1/4 inch Flat Washer	THRD1-4 - 1/4 inch Threaded Rod
Model #	N/A	EZCN3-8B - 3/8 inch Coupling Nut	EZHN3-8B - 3/8 inch Hex Nut	EZFW3-8B - 3/8 inch Flat Washer	THRD3-8B - 3/8 inch Threaded Rod

NOTE: Viewing PDF documents requires the free Adobe^® Reader^® version 5.0 or greater.If you don't already have it installed, you will need to download and install it before using PDF documents.